Mr. Brian Scartocci

This is my view from the FOH at the Woodshed Live. This was an awesome day and so many awesome performances. 

String action was a bit high and there was plenty of headroom for the saddle to be lowered. Plus a slight tweak of the truss rod and this thing became very shred-able. I love it when setups go this easy!

The customer wanted to swap the pups for these custom vintage-style handwound "reliced" pickups. 

These were fun to build-- great room treatment when you need to tackle problem areas around your room. In this case I mounted these directly behind the mixing position. Diffusion is a great alternative to absorptive panels as they scatter reflections evenly rather than kill the reflections. The result is a room that isn't so dead from too much absorption and retains a bit of that "live" room sound.

Nut slots wore too low(or were cut too low) so the customer wanted a new one. Since this has a floating vibrato I needed a super slick nut material, so Graphtech TUSQ XL it is! 

Built a few more bass traps and some quadratic "skyline" diffusers! The diffusers help get rid of harsh reflections without deadening the room too much. I put them on the backwall behind the mixing position. The guitars and gear shelf being where they are also help even things out.

This bridge was apparently lifting when the customer tried putting new strings on after is had been sitting in storage bare without strings for a few months. Carpenters glue like Titebond works well here because it dries very hard, can be melted with fairly low heat if service at a later date is required, and cleans up very easily. I left it clamped for 2 days and its solid as a rock.

This looker came in for a setup. My experience with Bigsby vibratos are that they will stay in tune exceptionally well if set-up properly.